Cameras · Lumix exFAT CFexpress Type B card
Recover supported Lumix media from CFexpress Type B
Can File Recovery Hero scan an exFAT Lumix CFexpress card?
Short answer
Yes, if the CFexpress Type B card mounts stably as exFAT on your Mac or Windows PC. Two things must fit: the file system and the file format. Select only RW2, JPEG, MP4 or MOV; recording formats outside File Recovery Hero's list are not covered, whichever card interface the camera uses.
The situation
Supported RW2, JPEG, MP4, or MOV files are missing from a readable card.
Yes, provided the card mounts as a stable exFAT volume on your Mac or Windows machine. Two separate things have to line up here: the file system the card carries, and whether the missing recordings are in a format the scan is able to identify.
01 / Diagnose
Work out what actually disappeared
Lumix bodies format CFexpress Type B cards as exFAT, exactly the file system covered, so the first condition is usually met without any effort on your side. The second depends on what the camera actually wrote. RW2 stills, JPEG images, MP4 and MOV clips are all identifiable, whereas a specialised recording format the body offers alongside them is not automatically part of that list.
File-system and file-format support both matter; the card interface alone does not guarantee every recording format is supported.
Check the last known path, trash and backups without writing to the original device.
02 / Protect the source
Preserve the best recovery chance
- 1
Attach the card through a reader and open the disk utility to confirm the volume really is exFAT at its full capacity.
- 2
Write down which formats the session produced, checking the extensions on comparable files you already hold.
- 3
Scan read-only and enable only the formats you genuinely need, which shortens both the run and the review.
- 4
Export to a separate drive and open one file of each type to confirm the formats returned as expected.
Do not format the card when the computer proposes it, and do not put it back in the camera for a comparison. If the volume shows a different file system than expected, stop and investigate rather than letting a tool correct it, since every correction writes to the card.
03 / Choose the method
Match the tool to the source
For stable, readable exFAT, NTFS and FAT16/FAT32 or uncompressed IMG, DD, RAW and BIN images.
Unconfirmed exports are marked .UNVERIFIED.
Support covers exFAT, NTFS and FAT16/FAT32 volumes, uncompressed IMG, DD, RAW or BIN images, and a defined set of file types. A Lumix recording format outside that set is not covered whatever card interface the camera uses, and encrypted or physically damaged media stay out of reach.
04 / Verify
Check the recovered content, not just its name
Check each format on its own: an RW2 developing at full resolution in a converter, a JPEG decoding to the complete frame, MP4 and MOV playing their stated duration with sound. When one format comes back well and another not at all, the format list is the usual reason, not the card.
Keep the source until two verified copies exist. One working preview is not enough.
Sources and technical references
FAQ
Questions about this recovery case
Can Lumix exFAT CFexpress Type B card be recovered in this situation?+
Yes, provided the card mounts as a stable exFAT volume on your Mac or Windows machine. Two separate things have to line up here: the file system the card carries, and whether the missing recordings are in a format the scan is able to identify. The result still depends on what remains readable on the source.
What should I avoid before scanning?+
Do not format the card when the computer proposes it, and do not put it back in the camera for a comparison.
Does scanning write to my memory card?+
Your memory card is only read. Nothing is saved to it.
How do I know whether the result is complete?+
Check each format on its own: an RW2 developing at full resolution in a converter, a JPEG decoding to the complete frame, MP4 and MOV playing their stated duration with sound.