Storage media · Samsung PRO Plus exFAT microSDXC card
Recover files from a Samsung PRO Plus microSDXC card
How do I recover files from a Samsung PRO Plus microSDXC card?
Short answer
First remove the card from the drone, action camera or recorder, then read it on a computer through a stable full-size adapter. Whether files come back depends on exFAT state and overwriting, not on the Samsung model. The host device decides folders and formats, so scan read-only for exactly what it recorded.
The situation
Drone, action-camera, or recorder media is missing.
Start by taking the card out of the drone, action camera or recorder that wrote it, because those devices keep writing logs and thumbnails whenever they are powered. On the computer the card is an ordinary exFAT volume, and the host decides which folders and formats you should be looking for.
01 / Diagnose
Work out what actually disappeared
A microSDXC card carries the layout of the device that filled it: a drone writes flight media into its own folders, an action camera splits long recordings into chapters, a recorder keeps a project database. Material disappears when the host deletes it, when a recording ends in a power loss, or when the card is formatted for a new session. The blocks stay until the host records again.
The host device and recording format define the folder layout; exFAT and overwriting define logical recoverability.
Check the last known path, trash and backups without writing to the original device.
02 / Protect the source
Preserve the best recovery chance
- 1
Shut the host device down and remove the microSDXC card before it can write another log entry or thumbnail.
- 2
Fit the card into a full-size adapter and use a stable reader rather than connecting the drone or camera by cable.
- 3
Check which folder layout and formats the host produced, then scan the exFAT volume read-only for exactly those file types.
- 4
Export the results to a computer disk and, for chaptered recordings, confirm that the chapters belong to the same session before joining them.
Do not put the card back into the device to see whether the files reappear, and do not accept its offer to repair or format the card. Connecting the host by cable during recovery is just as unwise, because it mounts the volume writable and may tidy up.
03 / Choose the method
Match the tool to the source
For stable, readable exFAT, NTFS and FAT16/FAT32 or uncompressed IMG, DD, RAW and BIN images.
Unconfirmed exports are marked .UNVERIFIED.
A microSDXC card has no write-protect switch of its own, so the only safe route is a read-only scan with an export elsewhere. File Recovery Hero reads exFAT, NTFS and FAT volumes; it does not repair an interrupted recording or read a physically damaged card.
04 / Verify
Check the recovered content, not just its name
Each recovered clip should play from beginning to end at the frame rate the host used, and chaptered recordings should run on without a gap at the joins. Check the timestamps as well: files whose dates jump to an impossible value were assembled from reused clusters.
Keep the source until two verified copies exist. One working preview is not enough.
Sources and technical references
FAQ
Questions about this recovery case
Can Samsung PRO Plus exFAT microSDXC card be recovered in this situation?+
Start by taking the card out of the drone, action camera or recorder that wrote it, because those devices keep writing logs and thumbnails whenever they are powered. On the computer the card is an ordinary exFAT volume, and the host decides which folders and formats you should be looking for. The result still depends on what remains readable on the source.
What should I avoid before scanning?+
Do not put the card back into the device to see whether the files reappear, and do not accept its offer to repair or format the card.
Does scanning write to my memory card?+
Your memory card is only read. Nothing is saved to it.
How do I know whether the result is complete?+
Each recovered clip should play from beginning to end at the frame rate the host used, and chaptered recordings should run on without a gap at the joins.